AUTONET TV

Power Failure (Broken Power Seat)

Know anyone who doesn't love a power seat in an SUV, a car, truck or van? They're convenient and precise in their adjustments.  But when they break, oh, what a pain.  Not only is it inconvenient, it may leave your seat position too close to the steering wheel or too far from the pedals.  This is a must-fix problem.

There are many things that cause a power seat to fail:

• Seat controls.  These are either at the side of the seat or in the door.  Both are places that can be exposed to moisture or other contaminants.  When the controls stop working, they usually need to be replaced.
• Seat motor.  Electric motors are what make a power seat move, and sometimes they fail.  Sometimes they just get worked to death and die of old age.  Replacement is the most common remedy.
• Fuses. A power seat is, after all, powered by electricity and all vehicle power systems have fuses to protect them.  A technician can determine which fuse may have blown and replace it.  But it's also important to figure out what caused the fuse to blow and deal with that, too.
• Wires.  There are wires under the seats that move when you move the seat.  Sometimes they get stretched, kinked or ripped.  In a power seat malfunction, it may be a wiring harness that needs to be replaced.
• Gears.  They help the seat move and may need to be realigned or replaced.
• Obstructions.  Yes, a piece of trash or a kid's toy has been known to jam up the works of a power seat. Taking them out of the mechanism may get your seat working again.

Most people pay extra to have power seats in a vehicle. So make sure you keep that convenient feature working. And don't forget that it's a safety issue, too.

Niel's Auto Service
49 Taylor Ct Ste B
Thousand Oaks, CA 91360
805-379-4040
http://www.nielsautoservice.net

Got it Covered! (Timing Cover Maintenance)

You may have heard at one time or another about something called a timing belt or timing chain in your engine.  And you may know that if they fail… well, let's just say that there can be some major engine damage.  So obviously, we want our timing belts and chains to be in tip-top shape.

One part that helps keep them running the way they should is the timing cover.  As you can probably guess, it's something that covers the belt or chain.  The timing cover protects both belts and chains from dirt and road debris.  Timing belts also need to be lubricated so their covers allow them to be lubricated as well.  They have a gasket that insures a good seal for the engine.  If that gasket breaks or develops a leak, then engine oil can escape, and loss of lubrication is never good for an engine component.

Other symptoms of a failed timing cover are leaking coolant, a metallic sound coming from the front of your engine or your Check Engine light coming on.  You might also notice a drop in power when you're going uphill.

It's important that your timing cover be in good condition and functioning properly.  Your repair facility will check out that part of your engine to make sure gaskets are in good shape and the cover is doing the job it's meant to do.  Catch that leaking or broken timing cover in time and your engine will thank you for avoiding some serious damage and an expensive repair.

Niel's Auto Service
49 Taylor Ct Ste B
Thousand Oaks, CA 91360
805-379-4040
http://www.nielsautoservice.net

Too Hot to Handle (Vehicle Overheating)

In the hot weather, seeing steam coming from the engine compartment is something we all dread.  No one wants that to happen to them. But if you know the signs of overheating and how to deal with it, you may be able to reduce the risk of damage to your vehicle, maybe even prevent getting stranded on the road.

Besides the steam coming out of the engine compartment, here are a few signs of overheating.  Your vehicle has a heat gauge that may have a needle that can go into a red zone or up to the "H" (for High) position.  You may smell odors, perhaps a burning (could be hot oil) or a sweet smell (engine coolant leaking). 

When you encounter any of those signs, you know you have to do something to keep the engine as cool as possible to avoid potentially catastrophic damage.  Turn off the air conditioning and turn up the heat.  While that last part may sound odd, it helps draw heat out of the engine. 

If you can do it safely, pull off the road to a spot away from traffic.  Turn off the engine so it can cool down for a few minutes.  You may want to call for help at this point, then switch on the key to "accessory" position to see if the engine has cooled down to the normal range.  You may have to have your car towed to a service facility or, if there's one nearby, you may be able to slowly drive to it.  But keep your eye on the heat gauge and immediately stop if it starts to overheat again. 

The best hedge against engine overheating is regular maintenance.  When the cooling system and other engine components are working like they should, your chances of an overheated engine are drastically reduced.  Your service facility will keep their eyes open for leaking hoses, cracked belts, rusted pipes and other things so they don't fail at the most inopportune time.

Niel's Auto Service
49 Taylor Ct Ste B
Thousand Oaks, CA 91360
805-379-4040
http://www.nielsautoservice.net