AUTONET TV

No Strain, No Gain (The Basics of Oil Filters)

Ever wonder what one of the best things is to ever happen to your vehicle's engine?  It's the little thing that usually looks like a can, the oil filter.

Just like your kitchen sink strainer filters out errant particles of food from clogging your drain, the oil filter cleans out small particles that could cause your engine harm.

Your engine operates in a dirty, hot environment and gathers a lot of tiny contaminants like dirt, dust, little metal shards and unlucky bugs that get sucked in.  Get those things circulating in your engine and those little particles can cause friction, which starts wearing out those finely machined metal parts. 

You know how important it is to change your oil regularly.  It's vital that you change your oil filter at the same time to keep the oil as close to brand new as possible.

Most oil filters look like a metal can with some holes in the bottom.  Inside there are carefully chosen materials that can screen out the contaminants while at the same time allow the lubricating oil to pass through.  Early oil filters had steel wool, metal mesh or actual screens.  Then they tried fabric filters using material such as linen and cotton.  Finally, a less expensive disposable filter using paper and cellulose did the trick.

Cellulose or other synthetic media are used in most oil filters today.  Cellulose is inexpensive and effective.  Fibers filter out particulates and let the oil flow.  The other synthetic media have the ability to screen out even tinier particles while not significantly restricting the oil from getting through.  Engineers continue to work on even more advanced filter material.

Choosing the right oil filter is something our pros at Niel's Auto Service can help you with  because there are a lot of them out there.  Factoring into that decision are your driving habits, how far you drive and the temperatures to which your engine will be subjected.  While some filters will cost more than others, they may be worth it to extend the life of your engine. 

But most important is remembering to come have your oil changed at Niel's Auto Service regularly at the intervals recommended by the vehicle's manufacturer. Just like you wouldn't want to have a plumber come over to fix a clogged kitchen drain, you certainly wouldn't want to have to pay for major engine repairs if they could be prevented by regular oil and filter changes.

Niel's Auto Service
49 Taylor Ct Ste B
Thousand Oaks, CA 91360
805-379-4040
http://www.nielsautoservice.net

When Metal Meets Metal (Wheel Bearings)

What part of your vehicle has little metal balls inside that are lubricated and allow you to cruise on down the road?  They are wheel bearings, and automotive designers might argue they are human beings' second greatest invention of all time (the first is, of course, the wheel!).

You have a wheel bearing at each wheel.  They allow your wheels to turn freely, minimizing friction that would ordinarily slow you down when metal meets metal.  When one of your wheel bearings starts to go bad, it lets you know. A wheel bearing does its work quietly when it's in good health but starts getting noisy when it isn't.  People describe the noise differently.  Sometimes it sounds like road noise, a pulsating, rhythmic, sound.  That pulse speeds up when your vehicle speeds up. 

Here's what's happening when you hear that sound.  As mentioned, the bearing has these little metal balls inside a ring.  They have a lubricant inside to reduce friction between the balls; modern wheel bearings are sealed and they're intended to do their job without any maintenance. 

Wheel bearings take a beating; you hit some rough potholes or go over some uneven railroad tracks. Sometimes water can get into a bearing and reduce the ability of the lubricant to do its job.  Time starts to take its toll, too. When the lubricant isn't reducing friction like it should, the bearing can heat up. One of those little balls can start shedding pieces of metal and soon those shards start grinding up the other balls.  Friction takes over and soon your wheel isn't turning smoothly. That's what's causing the sound.  If a wheel bearing is not fixed, it could eventually seize up completely, and you can be stranded.

It's a lot easier if you heed the early warning signals, that pulsating noise.  Now, sometimes a similar noise can be caused by a bad tire, but in either case, it's important to have it checked out. Our Niel's Auto Service technicians will be able to tell you fairly quickly what the problem is and offer a solution.

Wheel bearings generally don't fail often and usually last from 85,000-100,000 miles/140,000km to 160,000km. But consider them a long-term maintenance item that, once fixed, will keep you heading smoothly to the next destination.

Niel's Auto Service
49 Taylor Ct Ste B
Thousand Oaks, CA 91360
805-379-4040
http://www.nielsautoservice.net

Singing a Different Tune (Up) (Tune Ups)

Engines required a lot more maintenance in earlier times.  You'd have to have your spark plugs, wires, rotors, caps, distributor points, fuel and air filters changed periodically.  There were mechanical adjustments of a vehicle's timing, dwell, spark gap and idle mixture, too. Unless you like to tinker with old cars, a lot of those terms won't mean much to you. 

That service was called a "tune up" back then, and you can see why.  But now, computers have reduced the number of maintenance items, and a tune up is a whole lot different than it used to be.  In fact, in some vehicle service facilities, that term is also a thing of the past. 

A tune up of today would more accurately be called simply periodic maintenance. Now, most vehicles still have spark plugs and wires, fuel filters, air filters and PCV valves, and they should be inspected tested and/or replaced at regular intervals.  Your vehicle's manufacturer has made recommendations on how often that should be. But it depends on your driving habits. Do you regularly tow a trailer? Do you drive on dusty roads often? Are you driving mostly stop and go in the city?  Depending on your answers, to those maintenance intervals might have to be more frequent.

Your service advisor will likely remind you about those "must check" items such as spark plugs and wires, air filter and oxygen sensor.  And now that the old-fashioned tune ups don't require you to take your vehicle in for maintenance as often, you can get the same benefit from scheduled oil changes or tire rotations.  When your vehicle is in for those, a technician can keep an eye on your other systems (fuel, emissions, ignition) to make sure they are operating correctly.

One thing to remember.  When you take your vehicle in for regular service or a specific issue, don't ever hesitate to ask you service advisor to explain what's being done and why.  Hey, "In Sync" may have been a boy band of an earlier era, but it's always good for you and your service advisor to be "in sync" when it comes to what maintenance is good for your vehicle.

Niel's Auto Service
49 Taylor Ct Ste B
Thousand Oaks, CA 91360
805-379-4040
http://www.nielsautoservice.net